
Cable & Wire Surface Defect Inspection Equipment

AI-Powered Machine Vision for Accurate Defect Detection
Taymer’s AI-powered surface inspection systems capture, analyze, and evaluate every square millimeter of your product, integrating directly into production lines for automated quality assurance. Using machine learning, they’re trained to distinguish true defects — pinholes, scratches, lumps, tears, discoloration — from harmless surface variations like dust or water droplets that trip up traditional inspection methods. Flexible camera configurations adapt to cable diameter, material type, and manufacturing application, covering wires, cable jackets, pipes, tubes, and bar stock. Founded in 1961, Taymer has installed 1,938 inspection systems in 55 countries and is ISO 9001:2015 certified.
Looking for Print Inspection? Click here
AI-Based Surface Defect Inspection for the Wire and Cable Industry
Manual visual inspection can’t keep pace with production speeds or catch subtle surface flaws consistently. Taymer’s surface inspection systems replace that bottleneck with continuous, camera-based monitoring built specifically for wire, cable, pipe, and tube extrusion lines.
Explore the full lineup below to find the configuration that matches your line speed, product diameter, and inspection coverage requirements.
Inspection Systems

SI4100 Large ODs Surface Inspector
A larger diameter cable, pipe, or tube can be inspected using the SI4100, which has an additional camera to ensure that every part of your continuous product is inspected.

SI2100 Dual View Inspection
Our dual-camera-view SI2100 system enables simultaneous inspection of two different surfaces at once. In typical applications, it inspects flat products (strips, wires, etc.) on top & bottom.

WI1300 Wrap Defect Inspector
The Wrap Defect Inspector is the only tool available capable of performing thorough inspections of wrapped cables for wrapping flaws such as wrong pitch angle and overlap.

CV2000 Continuous Color Verification
The Color Verification system allows the operator to receive instantaneous digital image feedback about the current color quality for any production line.

SI1100 Single View Inspection
Inspect a specific area of your product with the SI1100 single-camera system. Inspection of welds and flat products, such as bars, tape, and profiles, is the primary use of this system.

SI4100-LP Profile and Inspection
Every square millimeter of your product will be captured by the SI4100-LP Cameras and Laser Profiler. It is the most thorough method of detecting surface flaws available.

How It Works
The surface defect detection and surface inspection system consists of multiple high resolution cameras and adequate lighting to capture images of cable moving at high speed. Multiple cameras are required to cover the full circumference of the cable, and an enclosure prevents ambient lighting from affecting the results.
- Advanced algorithm processes the images for surface inspection
- A typical algorithm is capable of detecting cable surface defects such as surface blemishes, holes, neck-downs, and bumps
- If a surface defect is detected, an alarm notifies your operator and an error report is saved to the ongoing data log
Frequently Asked Questions
What is AI-based surface defect inspection?
AI-based surface defect inspection uses machine learning software alongside high-resolution cameras to automatically detect and classify surface flaws on wire, cable, and similar continuous products, distinguishing true defects from harmless surface variations like dust or water droplets.
What defects can Taymer’s surface inspection systems detect?
Taymer’s surface inspection systems detect pinholes, scratches, lumps, tears, discoloration, surface blemishes, holes, neck-downs, and bumps on wire, cable, pipe, tube, bar stock, and other continuous products.
How does AI improve accuracy over traditional inspection methods?
Taymer’s AI defect detection algorithms are trained to recognize and classify true defects separately from harmless surface variations caused by dust, water droplets, or dirt — reducing false detections that traditional inspection methods often can’t distinguish.
Does Taymer offer print inspection as well as surface inspection?
Yes — in addition to surface defect inspection, Taymer offers print verification systems for checking printed information on wire and cable production lines.



