Vision & Quality Inspection

Surface Inspection

The Surface Inspector is the only camera based inspection system capable of detecting surface defects while displaying and analyzing every square millimeter of your product. The Surface Inspector (SI) series vision systems have been designed to work on a variety of product including: cable jacket, pipe, bar stock or tape. The detectable surface defects include pinholes, bulges, neckdowns, surface blemishes, discolorations, tape mis-wrapping, wrinkles, tears and many more.

SI1100

Surface Defect Inspection
- Single View


The SI1100 is a single view system to inspect a specific area of your product. This system is primarily used to inspect welds, flat surfaces.

SI2100

Surface Defect Inspection
- Dual View


Quick description text: The SI1200 is a dual view system to simultaneously inspect two different surfaces. Typical application for the SI2100 is for top and bottom inspection of flat products (strip, wire, etc.).

SI3100

Surface Defect Inspection


The Surface Inspector is the only tool that can capture, analyze, and judge every square millimeter of your product-cable jacket, pipe, tube, bar stock or water soluble tape. It is the most thorough method of detecting surface flaws available.

SI3100-MED

Surface Defect Inspection for Medical Tubing

The SI3100-MED is a specially designed version of the SI3100 for the medical tubing industry. This version includes special lighting and programming to detect gels, voids, bubbles, holes, discolorations and other critical defects.


SI3100-BW

Surface Defect Inspection for
Bare Wire


The SI3100-BW is the model of surface inspector specifically designed to inspect bare wire. This model compensates for the highly reflective surfaces through use of a a custom lighting array.

SI4100

Surface Inspector for
Power Cables and Large ODs


The SI4100 utilizes an additional camera compared to the SI3100 to cover the full circumference for large diameter cables/pipes/tubes to ensure every part of the surface is inspected.

WI1300

Wrap Defect Inspector


The Wrap Defect Inspector is the only tool that can capture, display and analyze every square millimeter of your product. It is the most thorough method of detecting wrapping flaws available.

CV2000

Color Verification 2000


The Color Verification system provides the operator with up to the second digital image feedback of the current color quality on any production line.


Print Inspection

Taymer camera inspection print verification is a critical print inspection tool to properly set up your wire marking equipment to free your operators from monitoring print quality. Print inspection and automated verification is critical to ensure your wire marking machines and cable meter marking machines are performing to your customer’s expectations.


Diameter Measurement


GS2100 - Glass Stretching Measurement System

GS2100

Camera Inspection for Glass Fiber Preform

The only tool that can continuously measure the glass preform rod for fiber optic cables during the stretching process to ensure the resultant preform diameter is both consistent and accurate.

LN2400

Lump and Neckdown Detector and Diameter Gauge

The Lump and neck-down Inspector is the only tool that can provide images of your lumps and neck-downs on: cable jacket, pipe, or tube.

ZT5000 - High Speed Diameter Measurement Lump & Neckdown Gauge

ZT5000

High Speed Diameter Measurement and Lump and Neckdown Gauge

The High-Speed Lump and Neckdown Inspector is the only tool that can provide images of your lumps and neckdowns on: bare wire and fiber.

Ribbon Inspection


RI2400

Ribbon Inspector

The Ribbon Inspector's continuous capture mode of operation provides the operator with up to the second digital image feedback of the current status of the fiber optic ribbon.