SM1000-PMC

HOT STAMP WIRE MARKING MACHINE WITH Pull Measure Cut
For Identification of Wiring Harnesses and Cable Assemblies

Click Here for PDF format brochure of this wire marker
Adobe Acrobat required.

OVERVIEW

   Taymer's SM1000-PMC is a reliable production wire marking machine that will give you many years of continuous service.

   The SM1000-PMC Wire Marker has a simple interface allowing your operator to easily and accurately set the print interval and print length for a print job, set up the printer and press go.  The printer will do the rest!  The SM1000-PMC productivity enhancements will appeal to most harness manufacturers, whether you are using the harnesses in your own equipment or fabricating for your customer's needs.  If you need extra graphics or characters such as brackets, ask about Taymer's 45 position marking die wheels.

   The SM1000-PMC is a wire marker designed to withstand the rigors of the production environment and give you many years of continuous service.
 

FEATURES

• Stepper motor with electronic control ensures accurate, easy print interval markings.
• Marks identification codes in virtually any print interval starting at 1".
• Excellent throughput – 75 feet or 20 meters per minute
• Single wire guide handles a range of wire diameters reducing setup time.
• Simple control and operation.
• 10 flame hardened wheels, each with up to 45 characters allows for quick selection of identification codes.
• Digital temperature control with feedback loop.
• Optional second tape carriage provides up to spool reduces production interruptions.
• Rugged, heavy duty construction for the production environment.
   

SPECIFICATIONS

• Maximum Speed: 50 feet per minute
• Wire and Cable Size: 0.040" - 0.300"
• Number of Marking Wheels: up to 40, 10 standard
• Weight: 80 lbs
• Dimensions: 24" X 33" X 16" (L x W x H)
• Table Mount Base with mount holes
• Push Button or Foot Pedal Operation
• Temperature PID with feedback
• Power: 115/240 VAC 50/60 Hz
• Compressed Air 80-100 psi