|
INK JET PRINTING WITH UV CURE
for wire and cable
Click here for a PDF Brochure. Adobe Acrobat required.
The Taymer UV Cure System consists of a stand for guiding the cable, a
platform for mounting one or two ink jet printers and an optional station for Controljet hardware and software. This provides a complete system for printing wire and cable with a durable and highly
visible legend.
Several models are available with single or dual curing stations to accommodate line speeds up to 600 feet per minute. A hardware and software
control adjusts the UV intensity as the line speed varies to optimize the curing of the ink.
The Taymer UV Cure System is safe and easy to Use. All UV rays are contained within a light tight Enclosure.
Contact us today for full details.
FEATURES
- Durable and highly visible legend
- Curing capacity from 3000 to 12000 watts
- Line speeds to 600 ft. per minute
- Light enclosure with safety interlock to prevent the escape of unwanted UV light to the surrounding area
- Complete cable control through the pneumatic guide roll system to ensure accurate length measurement and print
positioning
- Heavy duty castors and jack bolts for easy movement in and out of the production line without interrupting the
process
- Rugged durable construction for the production environment
- One ststion for mounting all measuring, printing, curing and controlling functions
- Can accommodate two printers for both white and black ink applications
- Unique light tight seals at both ends of the enclosure allow wire to pass through without light leaks
INK JET PRINTING WITH UV CURE SPECIFICATIONS
- Cable diameter: 1/4 inch to 4 inches
- Maximum speed: Up to 600 feet/min (180 m/min)
- Character height: 1/8 inch to 3/8 inch
- Printhead holder: Micro adjustable (2 axes)
- Machine layout: Right to left or left to right
- Dimensions: 6 feet long, 54 inches high (without Controljet)32 inches deep
- Weight: 900 lbs.
- Jacket material: PE, Cross-link PE, PVC, nylon, Teflon, neoprene
- Mounting: Caster base with leveling screws
- Power requirements: 480 VAC 3-phase 13 A/leg (UV lamp)120 VAC single phase 2A (ink jet)
- Compressed air: 40-50 psi
- UV coverage: Optional 360 deg. For small wire
|
