|
Model HF 4000 - Double Drum Hot Foil Printer
(metric-metric configuration)
HOT FOIL PRINTING
for wire and cable
Click here for a PDF Brochure. Adobe Acrobat required.
The Taymer HF 4000 Hot Foil Printer is designed for printing without any interruption in production. While one job is running, the alternate print drum can be set up for the next
job. A flick of the switch transfers the printing from the one print drum to the next. Footage only, metric only and footage and metric models are available.
A built in microprocessor controls all aspects of the marking process and adjusts the machine to suit the changing conditions and speeds of the production line. Clear durable legends are produced at
speeds up to 450 ft/min (150m/min).
The ease of operation and setup reduces scrap, production delays and the risk of damage to delicate communication and fibre optic cables. A dual tape spool and tape accumulator system eliminates print
interruptions.
These standard features and more make the Taymer HF 4000 a new generation in wire and cable printing.
Contact us today for full details.
FEATURES
- High accuracy sequential marking in meters or feet
- Reset to zero on the fly.
- Length adjustment in increments of ± .001
- Dual tape spools and accumulators eliminate tape splicing
- Microcomputer controlled adjustments reduce the need for operator intervention
- Adjustable guide rollers prevent damage to cables
- Casters for easy movement in and out of the line
- Rugged, heavy duty construction for the production environment
HOT FOIL PRINTING SPECIFICATIONS
- Cable size: 0.2" to 5" dia. (5.0 mm to 127 mm)
- Maximum speed: up to 450 ft/min. (footage mode)
up to 150 m/min. (metric mode)
- Drum drive: Micro controlled brushless servo
- Print interval accuracy: 1: 1,000
- Correction adjust increments: 1 part in 1,000 ±
- Type form: Engraved steel, hardened
- Character height: 1/16" to 5/16" (1.6 mm to 8.0 mm)
- Print legend length: 240 characters metric or
120 characters footage at 7 characters per inch
- Print colours: White, black, yellow
(others on request)
- Spool length: 3/8" x 42,000 feet or
1/4" x 72,000 feet
10 mm x 12,805 m
6 mm x 21,951 m
- Capacity, spools: 2
- Print temperature: Micro controlled (P.I.D.)
- Sequential marking: 6 digit
- On the fly reset: Yes
- Machine layout: Left to right or right to left
- Print Interval: Footage or Metric
- Power requirements: 280 - 240 VAC 16A,
- single phase, 50/60 Hz
- Compressed air: 80 PSI @ 5 to 10 CFM, dry
- Jacket materials: Rubber, Nylon, PVC, Med & HDPE,various cross-linked and semi-conductive materials
- Spent tape takeup: Vacuum
- Fault & warning signals: 8 digit status display and warning light
- Stopped line response: Automatic lift carriage drop
- Emergency stop: Standard
- Machine weight: 1,200 lbs. (545 kg)
- Mounting: Caster base with levelling screws
|
