|
GEMEL WIRE DECOILER AIR PAYOFF
Click here for a PDF Brochure. Adobe Acrobat required.
Click on this link to see video of the Gemel 3050 in action.
Windows Media Player required.
Load a Standard Wire Carrier Directly from the Lift Truck
- Reduce Press Downtime
- Eliminate Manual Handling
- Make the Workplace Safer
Price - Performance Breakthrough
The new Gemel 3050 represents a price-performance breakthrough in wire decoiling. Its integrated drive unit combines the drive, and the
brake in a single, air-powered assembly. This unique drive reacts quickly on both feed and brake cycles to eliminate tension or spillage.
Minimal Maintenance
Your Gemel has few moving parts. There are no gears, belts, pulleys, chains, electric motors or micro switches to wear out or require
adjustment. Typically, the only maintenance required is an occasional adjustment of the brake pads. All components of your Gemel are North American made and available off the shelf.
Easy to Install
Your Gemel is operating within 15 minutes of its arrival. Just uncrate, plug in an air line, feed the strip through the control arm and go. No
expensive electrical hookups or approvals are needed. Because all it requires is an air connection, it can easily be moved around your plant.
Fully Automatic Operation
The Gemel 3050 Wire Decoiler is fully automatic. It requires no supervision, no manual start-up, stop or intermittent adjustments. The
patented air logic valve provides instant control of any combination of power and speed within the range of 0 to 50 rpm.
Proven Reliability
Gemel has been building wire decoilers for 20 years. These units have developed a reputation as rugged and reliable workhorses. Many of the
original Gemel wire decoilers are still in operation.
Low Operating Costs
The Gemel's power source is a standard 1/4" air hose. The air circuit system consumes less than 2 cubic feet of free air per minute to
assure you of maximum efficiency for power consumed. The Gemel takes up only 4 feet by 4 feet of valuable floor space for easy installation close to your press.
SPECIFICATIONS
- Capacity: 3000 lbs
- Turntable Speed: 0 to 50 rpm
- Rate of Payoff: up to 300 feet per minute from 18 inch ID carrier
- Diameter of Pallet Table: 48 inches (including safety ring)
- Wire Diameter: 1/32 inches to 1/4 inches
- Power Source: 1/4 inch air hose (80 psi)
- Control: Counter Balanced Tension Arm
- Floor Space Required: 4 feet by 4 feet
- Height of Pallet Table over Floor: 12 inches
- Weight of Decoiler: 450 lbs
- Shipping Weight: 470 lbs
|
