|
PERMANENT PRINTING & SEQUENTIAL MARKING
for wire and cable
A contact or indent printer with dc servo drive control for accurate length measurement
Click here for a PDF Brochure. Adobe Acrobat required.
FEATURES
- Contact or indent printing
- Accurate length measurement
- Easy calibration through a keyboard
- Rapid changeover of print legend to minimize production interruptions
- Tested and proven in hundreds of installations worldwide
- Automatic reset to zero with outputs to cutter or operator signal
- Optional coding head for rapid changeover of product code or run identification
- Rugged durable construction for the production environment
- Heavy duty castors and jack screws for easy movement in and out of the production line
- Optional gas preheater for improved ink adhesion on difficult substrates
Call us to find out several hundreds of these workhorses have been purchased over the years and why many are still in operation in cable plants all over the world after 15 – 20 years
TYPICAL SYSTEM SPECIFICATIONS
- Print interval: Two feet, one meter or half meter
- Cable size: 5 to 102 mm diameter (0.2" to 4")
- Maximum speed Variable from 0 to 150 meters/minute
- Sequential marking accuracy: 0.3%
- Print inserts: Engraved steel, gravure surface
- Character height: 1.6 mm to 9.5 mm, 1.6 mm increments
- Print legend length: 20" (footage), 860 mm (meter), 380 mm (half meter)
- Sequential marking: 5 digits (0-99,999) increasing, 6 or 7 digits optional
- On the fly reset: Yes
- Product coding head: Optional up to 21 wheels with 11 characters each
- Machine layout: Left to right or right to left
- Machine dimensions: Length 1.0 m (40")Width 63.5 cm ( 25")Height 132.1 cm (52")
- Weight: 365 kg (800 lbs.)
- Mounting: Caster base with leveling screws
- Power requirements: 115/220 VAC, 200 watts
- Compressed air: 40-50 psi
- Jacket materials: PVC, Polyethylene, X Link Poly, Neoprene, etc.
- Remote status indicator: Available
- Remote emergency stop: Available
- Integrated gas preheater: Optional
|
