|
CJ 200
CONTROLJET SYSTEM
with nema-4 enclosure for ink jet printers
A windows based interface to allow for easy control of ink jet printers used in the wire and cable industry
PREVENTION AGAINST COSTLY PRINTING ERRORS AND REWORK!
Click here for a PDF Brochure. Adobe Acrobat required.
FEATURES
- Prevents/eliminates printing errors/mistakes
- Encoder input for length measurement
- Windows type interface makes the printer easy to use
- Can be interfaced to any printer with a serial port
- Stores all the legends used in the production line to eliminate errors in changeover
- Test print on production startup reduces scrap
- Stores sequential measuring requirements and print width along with the legend
- Alerts the operator to printer error or low ink conditions
- Reduces scrap and reruns by simplifying the printing function
- Allows to add, delete, modify and down load messages "on the fly" without interrupting current operations of
printers
CONTROLJET SPECIFICATIONS
- Number of printers that can be controlled: 1 or 2
- Host computer: PC compatible 386 or higher
- Host's minimum requirements: 16 MB Ram, 1 hard disk drive, VGA monitor, enhanced keyboard
- Software type: Multi-tasking (Round-Robin scheduler) with 1 window per task
- Message storage capacity: Limited only by hard drive capacity
- Message storage organization: Dictionaries of 128 messages each
- Maximum message length: 256 characters
- Maximum encoder pulses between print legends: 65,535
- Signals in:
Encoder: Open collector, 3.5V-30V amplitude
Pulses per inch of product: Between 20 and 100
External reset button: Normally open
- Signals out:
Serial port (COM1 & COM2): EIA-RS-232C (RS422 or 20ma current-loop available)
Baud rate: Up to 19,200
Print pulse type: TTL (LS244)
Print pulse duration: 10msec.
Stroke rate type: TTL (LS244)
Stroke rate frequency: 1 Hz - 1MHz
Stroke rate frequency update rate: Every 0.025 seconds
|
